Coil DD 32 for Metal Detector Fortune Metal Detector Fortune M3 Waterproof Coil

Description

Coil DD 32 for Metal Detector Fortune Metal Detector Fortune M3 Waterproof Coil
Coil Specifications:
Size: 30x32 cm. (11.8Ñ…12.6 inch)
Material: body - ABS plastic 2 mm, pouring - epoxy resin.
Frequency ≈ 6.8 kHz.
Sensor: tight.
Cable: four-core shielded.
Connector: 5 pin.
Search coil DD 23 suitable for metal detectors:
* Fortune M,M2,M3.
Fortune M3 case PL2943.
Fortune M3 pro.
* Quaser ARM,
Quasar ARM building 1910.
* Other induction metal detectors (IB).
The pinout of the sensor connector is as follows:
1 - RX +
2 - RX -
3 - screen
4 - TX +
5 - TX -
The coils have two laps: RX and TX. The RX circle is connected in parallel to the capacitor, and the circuit is closed.
The TX circle is connected in series to the capacitor, it is torn and can not measure the value of the TX circle. This feature of this coil.
The waterproof DD 30x32 coil is perhaps the best upgrade for your metal detector. Increased sensitivity, maximum stability, as well as improved discrimination even on the most highly mineralized soils in combination with small sizes - these are the characteristics that make this coil an indispensable tool when conducting searches in any conditions. DD Coil is an opportunity to increase the depth of detection of your finder! Advanced technology allows the coil to process the received signals at high speed.
This sensor works according to the Double-D scheme, they differ in more balanced operation and the absence of false positives.
The main difference is the difference between mono and DD technology is in the form of a beam of DD coils, due to the projection of which a high depth and degree of penetration of the signal into the soil is achieved.
Equipping metal detectors with this coil can significantly increase the search characteristics of these devices, since they have hidden potential. Modern technologies guarantee a stable signal and the absence of phantom responses.
The coil body is made of high-strength plastic, special attention should be paid to thick mounts that allow you to securely fix the search coil on the metal detector rod without backlash. The wire itself and its attachment points are reliably sealed like the entire coil as a whole. In addition, the inner cavity of the coil is filled with epoxy resin, due to which it will last for many years, without the risk of cracks and moisture. The cord, wire, plug, winding and fastenings to the rod itself are made efficiently and reliably. The coil is completely tight and allows you to conduct a full search both in the field and in shallow water.
Shipping Worldwide with Tracking number. Carefully package.
Contact Me